| Model No | R65 |
| Speaker Size (Inches) | 6.5" inch |
| Component | 2-way |
| Performance | Impendence (Ω) | 4 Ohm |
| DCR (Ω) | 3.0±0.15 Ohm | |
| Fo (Hz) | 64Hz ±10% | |
| SPL (dB/ 1 M.W) | 85±3 dB | |
| Frequency Response | 50~20 KHz (± 10dB) | |
| Continuous Power (Watt) per piece | 80 Watts (RS-426B) | |
| Ots | 0.6~0.8 (Speaker woofer) | |
| Testing | Life test | RS-426B/ 8H |
| Operation in High Temperature | 80℃/ 4H | |
| Operation in Low Temperature | -20℃/4H | |
| SST (Salf spray test) | CASS 48H (Clamp only) | |
| NSS 500H (Product completely ) | ||
| UV test | UV-340A, 500H with condensation( Product completely) | |
| Woofer | Basket | PC + ABS (125℃), Reference weight: 105g,UV protected,high gloss |
| Magnet | Φ90*Φ45*20mm（H），Y35, 17 OZ | |
| Top Plate | 5mm thick, Φ85*Φ29.10*5mm, Passiveation---Zinc plated, | |
| Back-plate | Steel with Zinc plated: Passivation--Zinc palted | |
| CCR (Center Copper Ring) | Material: Copper, 0.2mm thick | |
| Voice Coil | ID: Φ32.53mm, 0.15mmm Kaptone Bobbin, Φ0.37mm CCAW , DCR: 3.0±0.15 Ohm winding height: 12.60mm; SVC, 4- | |
| Cone and Surrounds | Cone: 0.40mm thick IMPP,Matte black Surrounds: Black 60 ° NBR premixed anti - UV agent. | |
| Spider | PC material, Black | |
| Dust Cap | 0.40mm thick IMPP，Matte black | |
| Terminal | Built-in rear cover, cooper, 0.8mm thick Pin | |
| Screw (between top plate & basket) | M5* 8mm, Steel with Zinc plated | |
| Tweeter | Size | 25.4mm (1") PEI dome with Neo-magnet |
| Dome (Diaphragm) | PEI Dome, 0.05mm thick | |
| Finish: Silver color | ||
| Magnet | N38H Neo-magnet, Φ24*Φ4*3mm | |
| Top plate | Zinc plated, Φ25*2.5mm | |
| Yoke | low-carbon steel, Zinc plated | |
| Vice Coil | Bobbin: Φ25.40mm,0.075mm thick Kapton | |
Wire:Φ0.13mm CCAW , DCR: 3.1 Ohm±0.16, winding height: 1.80 mm; SVC, 2-layer | ||
| Sealed Sticker | Yes | |
| Jump wire | 28 AWG ,Four-color PVC leather thread, for tweeter out to terminal | |
| Ferro fluid | Yes | |
| RGB Lighting | LED | SMT Type LED (RGB SMT light) x 6-pcs |
| LED PCB | CEM1, 1mm Thickness | |
| LED Jump Wire | 28AWG,Four-color PVC leather thread | |
| Assembly | Grille | QIMEI PA-777D ABS (105℃), Reference weight: 82g, UV protected |
| finish:matte black (matte black painted and UV coating) | ||
| Logo: hot stamping (silver color) | ||
| LED diffuser cover | 0.8 transparent PVC, 0.8mm thickness after molding | |
| Real gasket | Black 55° NBR | |
| Screw | M3*8,steel with Zinc plated | |
| PR | Cone and Surrounds | Black 60° NBR; 0.50mm thick IMPP |
| Spider | PC material,yellow | |
| Basket | 0.6mm SPCC, matte black | |
| Gasket | 0.7mm thick PP | |
| Screw | M4*8，304 stainless | |
| Clump weight | Carbon steel with Zinc plated, 27.5G | |
| Clamps | Silicone insert | Black 75° ,0.3mm |
| Rubber insert | Black 70° NBR,2mm | |
| Screw | M6*16, 304 stainless | |
| Screw | M5*25, 304 stainless | |
| Nut | M5 | |
| Screw | M8*65, 304 stainless | |
| Nut | M8 | |
| Clamps | low-carbon steel, Zinc plated with matte black finish,3mm | |
| Clamps | 4mm thick SPCC, Zinc plated | |
| Clamps | low-carbon steel, Zinc plated with matte black finish,5.4mm | |
| Clamps | Aluminum with matte black finish | |
| Clamps | 2mm thick Aluminum with matte black finish | |
| Gasket | Black 70° NBR,1.3mm | |
| Gasket | 304 stainless, 1.5mm | |
| Encosure Assembly | Enclosure | Black QIMEI PA-777D ABS (105℃) with texture MT11020 |
| LOGO Badge | Aluminum with matte black finish, 1.4mm | |
| Mounting ring | Black QIMEI PA-777D ABS (85℃),3mm | |
| Grommet | Black 55° NBR | |
| Metal mesh | 0.7mm thick SPCC ,2.5*P3.2mm | |
| Screws | M3X12,Steel with Zinc plated | |
| Screws | 8#-15T304, stainless | |
| Water proof connector ( Female) | Six core wires(2 Pin+18AWG wire for speker;4 Pin+22AWG wire for LED) |
