RED1800.1
Edge engineered the RED1800.1 Class D mono-block subwoofer amplifier to be dominant in both power and reliability. The RED1800.1D is 1-Ohm stable and utilizes a wide array premium components that make it extremely powerful and reliable - such as its high speed MOSFET power supply and advanced PCB board layout. Conservatively rated at 1800 watts RMS power at a 1-ohm load. 

Especially, this mono amp is strappable (bridgeable). Strapping will give you twice the power and double the impedance load compared to having one single amplifier. If you have a 1,800w amplifier at 1 ohm, and you strap it with an identical amplifier at 1ohm, you’ll have 3,600w at 2ohm. Each amp will still be responsible for handling it’s own 1,800w at 1ohm, but together they’re sending out twice as much energy.

Furthermore, the oversized 1/0 gauge power and ground terminals found on the amplifier allow for maximum current flow. You'll have full reign over your amplifier with the built-in user control panel, featuring a bass EQ, and variable adjustment tunings for gain level, low-pass filter, and subsonic filter.

In addition to all of the above features, this model also features 4-way protection circuitry, including electrical shortage, overheating, low voltage, and more.



     Class-D Mono-block Subwoofer Amplifier, RMS 3,600 Watts@2Ohm Linked, RMS 2,500 Watts@4Ohm Linked, RMS 1800 Watts x 1@1 Ohm; RMS 1200 Watts x 1@2Ohm; RMS 650 Watts x 1@4Ohm. Edge mono amplifiers are stable down to ONE Ohm, giving you the freedom to put even more subs in your system.


     This RED1800.1 monoblock amplifier is strappable (bridgeable) with slave/master switch, so that you can get more power output.


     Featuring a high-speed MOSFET power supply, premium grade internal components, as well as 4-way protection circuitry, the amplifier will safely operate at the highest levels of performance for hours on end. Highly efficient heatsinks keep the amplifier cool with a sophisticated new look.


     Edge mono amplifiers come with bass remote control. It has Use it to customize your bass on the fly with just a turn of a knob. 


     You'll have full reign over your amplifier with the built-in user control panel, featuring a bass EQ, and variable adjustment tunings for gain level, low-pass filter, and subsonic filter.


Dimensions: 17.7" x 7.6" x 2.2" (450mm x 193mm x 56mm).
Specficiation
• 1-Ohm Stable Car Subwoofer Amplifier
•       Class-D Monoblock Subwoofer Amplifier
•       4 Way Protection Circuitry: Thermal, Voltage, Speaker, DC
•       RMS Power at 1 Ohm: 1,800 Watts x 1 Channel (14.4v)
•       RMS Power at 2 Ohms: 1,200 Watts x 1 Channel (14.4v)
•       RMS Power at 4 Ohms: 650 Watts x 1 Channel (14.4v)
•       LINKED RMS Power at 2 Ohm: 3,600 Watts x 1 Channel (14.4v)
•       LINKED RMS Power at 4 Ohm: 2,400 Watts x 1 Channel (14.4v)
•       High Speed MOSFET Power Supply
•       Soft Turn on Circuit
•       Frequency Response: 10Hz - 250Hz
•       Input Sensitivity: 12V - 0.2V
•       Signal to Noise Ratio: 97dB
•       Bass Boost: 0 - 9dB
•       Low Pass Filter (Variable): 35Hz - 250Hz
•       Subsonic Filter: 10Hz - 50Hz
•       Remote Bass Knob & Wire Included
•       1/0 Gauge Power and Ground Terminals
•       Fuse Rating:  130 Amp
•       Dimensions: 17.7" x 7.6" x 2.2" (450mm x 193mm x 56mm)

WIRELESS EDGE LIMITED
7TH BUILDING, NO.59 CHANUG FU ROAD, XIAO GANG INDUSTRIAL ZONE, NINGBO 315800, CHINA
TEL:+86.574.873.88888
EMAIL:info@edgeholdings.com
Copyright @ 2022 EDGE
< a href=' '>web聊天